High Country Tek DVC80 - Manual (Page 98)

P/N: 021-00154, Rev. A.6 - updated for V4.7 Tools Page | 98
Number:
This field contains the (message) number. This number is stored in the DVC70 during data collection, and is
used in order to determine the Message when the user downloads the data using the Loader Monitor.
Range: 1 – 32768.
Message:
This field contains the message to be added to the Message List. Message is what is displayed in the output
Log File.
Range: 40 Alpha/Numeric characters.
Note: When the user finishes typing the contents of a message, the Enter key must be pressed in order for the
message to be accepted.
Add Message:
Appends the message to the Message List
Delete Message:
Deletes the current message from the Message List
Edit Message:
Transfers the current message from the Message List to the Number and Message fields so that the message
can be modified and saved back to the Message List.
Load New Message File:
Allows the user to load a new message file
OK:
Accepts all changes made to one or more messages in the Message List and closes the Message Editor
Screen.
Note: In order to change an existing message, locate the message to be changed, press the Edit Message
button, modify the message shown in the Message field, and press the Add Message button.
DVC70 Program Variables
DVC70.Status
Displays the DVC70 Status (On \ Off line).
Possible Values: 0 = Online
2 = Offline
DVC70.ActiveB