High Country Tek epc, Electronic Pump Controller - A Multi-Function SAE J1939 Compatible Module - Manual (Page 20)

023-00354-Rev1.6 evc/epc User Manual 20
Copyright © High Country Tek, Inc. – 2013
evc/epc Controller
With SAE J1939 Interface
Manual Mode
Caution

All settings on this tab are temporary and will immediately affect the outputs.

In manual mode all limits and controls are bypassed.

The evc/epc goes back to normal operation when exiting the GUI in manual mode.

Cycling power on the unit will reset the controller and remove manual override.
“Manual Mode” provides a quick method of testing the outputs. Manually verify that the system is working properly
and determine the max coil current for the present operating conditions.
To unlock manual control, you must enter the OEM password.
When the GUI is initially purchased, the OEM password is included.
The authorized user can then change the factory password if required for security.