High Country Tek epc, Electronic Pump Controller - A Multi-Function SAE J1939 Compatible Module - Manual (Page 32)

023-00354-Rev1.6 evc/epc User Manual 32
Copyright © High Country Tek, Inc. – 2013
evc/epc Controller
With SAE J1939 Interface
Anti-Stall or Horsepower Management With Fixed Command
The Anti-Stall function reduces the current to prevent the engine from stalling during a sudden external load
increase. The fixed set-point determines the max forward speed of the work function. The reverse set-point
determines the max reverse speed of the work function.

At start-up the measured RPM must initially reach the “RPM Slow” set-point to allow the evc/epc to ramp up Coil
A. This ensures that the prime mover has started and is at a stable speed.