High Country Tek epc, Electronic Pump Controller - A Multi-Function SAE J1939 Compatible Module - Manual (Page 9)

023-00354-Rev1.6 evc/epc User Manual 9
Copyright © High Country Tek, Inc. – 2013
evc/epc Controller
With SAE J1939 Interface
Using the evc/epc with your PC
Install the Graphical User Interface (GUI) on a host PC. Use the default file locations for easy future update. The
user has the option to choose file location.
Don’t run the GUI from a network as it needs access to certain files only in the Windows directories.
System Requirements

Windows XP, Vista or Windows7, 100MB or greater free disk space.

Insert the CD and follow the instructions. This will install the evc/epc GUI, manual and help files.

Install the Com Port driver. Locate the installation file by the following route:
Start

HCT Products

Digital Controllers

evc/epc

USB Serial Driver, CDMxxxxx_setup.exe

To insure a complete install, run the CDMxxxxx twice.
To launch evc Graphic User Interface, click Start

HCT Products

Digital Controllers
 evc/epc. Choose “evc
Closed Loop” for closed loop applications, choose “evc v1.20” for open loop applications.