Chatsworth Products Hot Aisle Containment - Manual (Page 21)

BTS Aisle Containment Manual, Rev. 1.0 ___ December 2013
Chatsworth Products 21
11. Cut Polycarbonate Panels to fit the duct and secure with Panel Clamps.
• The inside of the
extrusion used to
contstruct the duct has
a flat surface with a
raised edge that forms
a frame for each
polycarbonate panel,
see the details below.
• Measure and cut the
polycarbonate panels
using a utility knife and
straight edge or
Guardian Knife Guide
and Coroclaw Flute
Cutter.
• Insert panels into the
frame in the extrusion
and secure with panel
clamps. The clamps
snap into the threaded
opening on the
extrusion, see below.