Chatsworth Products Hot Aisle Containment - Manual (Page 43)

BTS Aisle Containment Manual, Rev. 1.0 ___ December 2013
Chatsworth Products 43
TERAFRAME AND GLOBALFRAME GEN 2 MOUNTING
For F-Series TeraFrame and GF-Series GlobalFrame Gen 2 Cabinets that are taller than
the door frame assembly, mount the bracket assembly as shown below. Install the M8 drop-
in nut in the cabinet’s upper frame slot. Attach the top bracket to the cabinet with the M8x12
bolt and M8 washer into the drop-in nut. The bottom bracket is attached to the door top rail
using one of the pre-installed M6 bolts in the rail and a M6 nut and washer. Attach the
bracket cover to the bottom bracket with two M4x6 screws.