Chatsworth Products Hot Aisle Containment - Manual (Page 44)

BTS Aisle Containment Manual, Rev. 1.0 ___ December 2013
Chatsworth Products 44
For F-Series TeraFrame and GF-Series GlobalFrame Gen 2 Cabinets that are shorter than
the door frame assembly, mount the bracket assembly as shown below; the picture is
shown from the back side of the door. Install the M8 drop-in nut in the cabinet’s upper frame
slot. Attach the bracket to the cabinet with the M8x12 bolt and M8 washer into the drop-in
nut. The bracket is attached to the door top rail using one of the pre-installed M6 bolts in the
rail and a M6 nut and washer. The bracket cover is not needed in this type of installation.