Asus TS300-PA4 - Manual (Page 114)

5-28 Chapter 4: BIOS setup
5.5 Power Configuration
The Power Configuration menu items allow you to change the settings for the ACPI
and Advanced Power Management (APM) features. Select an item then press
<Enter> to display the configuration options.
5.5.1 ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Configuration and Power Interface
(ACPI) support in the Advanced Programmable Interrupt Controller (APIC). When
set to Enabled, the ACPI APIC table pointer is included in the RSDT pointer list.
Configuration options: [Disabled] [Enabled]
ACPI APIC Support [Enabled]
APM Configuration
Hardware Monitor
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Include ACPI APIC
table pointer to RSDT
pointer list.
BIOS SETUP UTILITY
Main Advanced Power Sever Boot Exit
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
BIOS SETUP UTILITY
Power
Enable or disable APM.
APM Configuration
Power Management/APM [Enabled]
Video Power Down Mode [Suspend]
Hard Disk Power Down Mode [Suspend]
Standby Time Out [Disabled]
Suspend Time Out [Disabled]
Throttle Slow Clock Ratio [50%]
System Thermal [Disabled]
Power Button Mode [On/Off]
Restore on AC Power Loss [Last State]
Resume On Ring [Disabled]
Resume On LAN [Disabled]
Resume By PME# [Disabled]
Resume By RTC Alarm [Disabled]
Resume By PS/2 Keyboard [Disabled]
Power On By PS/2 Mouse [Disabled]
Power Management [Enabled]
Allows you to enable or disable the motherboard Advance Power Management
(APM) feature. Configuration options: [Enabled] [Disabled]
5.5.2 APM Configuration
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.