Asus TS300-PA4 - Manual (Page 132)

6-4 Chapter 6: RAID configuration
6.1.4 RAID configuration utilities
Depending on the RAID connectors that you use, you can create a RAID set using
the utilities embedded in each RAID controller. For example, for P5MT model, use
the LSI Logic Embedded SATA RAID Setup Utility if you installed SATA hard disk
drives on the SATA connectors supported by the Intel ® ICH7R Southbridge.
For P5MT-S model, use the Adaptec SCSISelect™ Utility if you installed SCSI hard
disk drives to the SCSI connector(s) supported by the Adaptec AIC-7901 PCI-X
SCSI controller. Refer to the succeeding sections for details on how to use each
RAID configuration utility.