Asus TS300-PA4 - Manual (Page 126)

5-40 Chapter 4: BIOS setup
5.8 Exit menu
The Exit menu items allow you to load the optimal or failsafe default values for the
BIOS items, and save or discard your changes to the BIOS items.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Exit system setup
after saving the
changes.
F10 key can be used
for this operation.
BIOS SETUP UTILITY
Main Advanced Power Sever Boot Exit
Exit Options
Exit & Save Changes
Exit & Discard Changes
Discard Changes
Load Setup Defaults
If you made changes to any of the settings in the menus, pressing <Esc> does
not immediately exit this menu. A confirmation window appears and prompts
you to either save your changes or cancel the command. Select one of the
options from this menu to exit.
Exit & Save Changes
Select this option then press <Enter>, or simply press <F10>, to save your
changes to CMOS before exiting the Setup utility.
When a confirmation window appears, select [OK] then press <Enter> to save your
changes and exit Setup. If you wish to cancel the command, select [Cancel] then
press <Enter> to return to the Exit menu.
Exit & Discard Changes
Select this option then press <Enter> to exit the Setup utility without saving your
changes.
When a confirmation window appears, select [OK] then press <Enter> to discard
your changes and exit Setup. If you wish to cancel the command, select [Cancel]
then press <Enter> to return to the Exit menu.
Discard Changes
Select this option then press <Enter> to discard the changes that you made, and
restore the previously saved settings.
When a confirmation window appears, select [OK] then press <Enter> to discard
the changes, and load the previously saved settings. If you wish to cancel the
command, select [Cancel] then press <Enter> to return to the Exit menu.