Asus TS300-PA4 - Manual (Page 48)

Chapter 2: Hardware setup 2-28
Back side
The back side of SCSI backplane faces the
rear panel when installed. This side includes
the power connectors, SCSI interfaces for
the motherboard SCSI connector or the
SCSI/RAID card and terminator, an HDD fan
connector, and SMBus connectors.
• the upper SCSI interface of the backplane connects to the motherboard SCSI
connector or the SCSI/RAID card
• a SCSI multi-mode terminator (LVD/SE) is connected to the lower SCSI
interface of the backplane
68-pin SCSI connector
(connects the SCSI cable from the
motherboard SCSI connector or
the SCSI/RAID card)
SMBus connector
[SMB_IN1] (connects the SMB cable from the
motherboard)
Fan connector (for HDD fan)
Power connectors (connect power plugs from
the power supply)
68-pin SCSI connector
(with SCSI multi-mode terminator)