Asus TS300-PA4 - Manual (Page 164)

6-36 Chapter 6: RAID configuration
6. Select the stripe size from the menu,
then press <Enter>.
For server systems, we recommend that you use a lower array block size. For
multimedia computer systems used mainly for audio and video editing, we
recommend a higher array block size for optimum performance.
7. When prompted, use the keyboard to assign a name for the RAID 0 set, then
press <Enter>.
8. If you want to make the array
bootable, select Yes from the menu,
then press <Enter>.
9. When prompted to create the RAID 0
set, select Yes, then press <Enter>.
A Build Complete message
appears to indicate that you have
successfully created the RAID 0 set.
The utility erases all data from the selected hard disk drives. Make sure to
backup all important data before creating a RAID set.