Asus TS300-PA4 - Manual (Page 162)

6-34 Chapter 6: RAID configuration
6.4.3 Creating a RAID 0 set (Stripe)
To create a RAID 0 set for Performance:
1. After enabling the HostRAID, the utility returns to the initial menu. Use
the arrow keys to select Configure/View HostRAID Settings, then press
<Enter>.
2. The utility displays the installed SCSI hard disk drives status and menu
options. When available, the HDD status shows Free. Press <C>.
The utility does not display an installed SCSI HDD(s) with an existing RAID
condiguration or is part of an existing RAID set. Use the SCSI Disk Utilities
to reformat the HDD(s), or use the previous RAID card to clear the RAID
configuration on the HDD(s).