Rebuilding failed drives -23, 5 rebuilding failed drives – Asus TS300-PA4 User Manual
Page 151
Advertising
ASUS TS300-E3/PA4 & PS4
6-23
6.2.5
Rebuilding failed drives
You can manually rebuild failed hard disk drives using the Rebuild command in the
Management Menu.
To rebuild a failed hard disk drive:
1. From the Management Menu, highlight Rebuild, then press <Enter>.
2. The PHYSICAL DRIVES SELECTION MENU displays the available drives
connected to the SATA ports. Select the drive you want to rebuild, then press
<SpaceBar>.
Advertising
This manual is related to the following products: