Asus TS300-PA4 User Manual
Page 170
Advertising
6-42
Chapter 6: RAID configuration
3. Select RAID-10 (Fault Tolerance, High Performance) from the Select RAID
Type menu, then press <Enter>.
4. Use the arrow keys to select a RAID set member, then press
<SpaceBar> to mark. An X mark appears after the selected HDD.
5. Follow the step 4 to select the other members of the RAID set, then press
<Enter> when finished.
Refer to the Striping/Mirroring Requirements note at the bottom of the screen
to determine the number of hard disk drives required for the selected RAID type.
Advertising
This manual is related to the following products: