Led information -9, 6 led information, System and hdd led – Asus TS300-PA4 User Manual
Page 19
ASUS TS300-E3/PA4 & PS4
1-9
1.6
LED information
The barebone system comes with five LED indicators. Refer to the following table
for the LED status description.
System and HDD LED
*SCSI Access Fault-Tolerant Enclosure (on PS4 model only)
!
Power LED (blue)
HDD Access LED (green)
Message LED (red)
Drive Status LED (green/red)
Drive Activity LED (green)
The Power, HDD Access, and Message LEDs are visible even if the system
front bezel is closed.
LED
Icon Display status
Description
System
Power LED
ON
Blinking
System power ON
System is in suspend mode
HDD Access LED
OFF
Blinking
No activity
Read/write data into the HDD
Message LED
OFF
Blinking
System is normal; no incoming event
ASMS indicates a HW monitor event
Hard disk drives
Drive Status LED
Green
Red
Green/Red - Blinking
Bridge board connected to backplane
Installed HDD is in good condition
HDD failure
HDD rebuilding using the RAID card
SAF-TE* function
Drive Activity LED
Blinking
Read/write data into the HDD