Asus TS300-PA4 - Manual (Page 68)

Chapter 3: Installation option 3-2
The items required for the optional configurations described in this chapter
are not included in the standard barebone system package. These items are
purchased separately.
Preparing the system for rack mounting
Removing the footpads or roller wheels
Refer to section “2.10.6 Chassis footpads and roller wheels” for instructions on
removing the footpads or roller wheels.
Attaching the rack rails
Refer to the installation guide that came with the Rackmount Rail Kit for
instructions on how to attach the rails and on the barebone server system and the
corresponding rails on the industrial rack.
4. Locate two round mylars on top
cover.
5. Carefully remove each mylar using
a sharp, flat object such as the
edge of a cutter.
Removing the top cover
To remove the top cover:
1. Remove the chassis cover. Refer
to section “2.1.1 Removing the side
cover.”
2. Remove the front panel assembly.
Refer to section “2.5.1 Removing
the front panel assembly.
3. Carefully slide out the protruding
portion of the top cover as shown.
3
We recommend that you allot at least 1U space above the server system to
ensure optimal thermal performance.