Asus TS300-PA4 - Manual (Page 176)

6-48 Chapter 6: RAID configuration
6.4.8 Deleting a RAID set
To delete a RAID set:
1. Press <D> from the Configure/View Host RAID Settings menu.
3. When prompted, select Yes from
the Delete Array? menu, then press
<Enter>.
You lose all data on the hard disk drives when you delete a RAID set. Make
sure to back up all important data before deleting a RAID set.
4. Press <ESC> to exit the utility.
2. For RAID 0 and RAID 10 set, go to step 3. For a RAID 1 set, select a delete
option from the menu (see below), then go to step 3.
• Drive ID 1 - Deletes all data on drive 1
• Drive ID 2 - Deletes all data on drive 2
• Drive ID 1 & 2 - Deletes all data on both drives
• None - Breaks the array but keeps all existing data on both drives