Creating a raid 1 set (mirror) -37, 4 creating a raid 1 set (mirror) – Asus TS300-PA4 User Manual
Page 165
Advertising
ASUS TS300-E3/PA4 & PS4
6-37
10. The screen displays the information on the created RAID set.
Press <Esc> to exit the utility.
6.4.4
Creating a RAID 1 set (Mirror)
To create a RAID 1 set for Fault Tolerance:
1. Follow steps 1 to 2 of the Creating a RAID 0 set section.
2. Select RAID-1 (Fault Tolerance) from the Select RAID Type menu, then
press <Enter>.
Refer to the Mirroring Requirements note at the bottom of the screen to
determine the number of hard disk drives required for the selected RAID type.
Advertising
This manual is related to the following products: