Hardware installation – Asante Technologies Voyager II User Manual
Page 11
Hardware Installation
This product can be installed on any convenient flat surface or can be attached to the wall or
ceiling. (Note: The product is provided with an image flip function to convert inverted
images to normal. Refer to the “Setting/Basic Setting/Video/PreProc” for more information.)
1. Connect to the LAN cable
Plug one end of your LAN cable in the LAN socket on the back of the camera and connect
the other end to the network that you want to access to.
2. Connect to power supply
Plug one end of the attached power cable in the power socket of the product and connect the
other end to the AC power outlet. When the product has been connected and turned on, the
LED lights orange about 15 seconds. When any link to the network is detected, the LED
lights green.
11