System introduction – Asante Technologies Voyager II User Manual
Page 7
Advertising
System Introduction
Product layout and connection diagram
DC power inlet
Please connect the product to a power supply from the DC Power Inlet.
Tripod
The product can be fixed on the wall (Fig. 1) or hung from the ceiling (Fig. 2).
When using the attached plastic anchor and screws to fix the product, make sure that no steel
bars or power cables exist behind the position where the product is to be fixed. Some walls or
ceilings may not be strong enough to support the tripod and the product. Pay attention during
installation to avoid injury that might be brought about due to falling of the product.
Fixed on a ceiling (Fig. 2)
Fixed on a wall (Fig. 1)
7
Advertising