Asante Technologies Voyager II User Manual
Page 9
Default settings
After turning on the power, insert a slim plastic object into the reset orifice and press for five
seconds to restore the unit to factory settings.
Default Settings
Built-in microphone
The product is provided with built-in microphone pickup function. Don't block this hole if
you want to use this function to acquire the best audio response.
Built-in
microphone
Power, Link and Event
LED
The status of Power LED and Link LED
Status color
Description
Power Orange When power supply plug into the DC Power Inlet, the system will
boot up and the orange LED will light up about 15 seconds then
go out.
Link
Green
The green LED lights up when you transmit images after turning
on the camera.
Event
Green
The green LED flashes when motion or alert detection is
implemented after turning on the camera.
The LED Switch can be set to On or Off, please refer to the “Setting>Basic
Setting>System>System>System Info” for more information.
9