Asante Technologies Voyager II - Manual (Page 12)

Camera Settings
After the hardware has been installed, insert the supplied CD in the computer and execute the
file IP Finder.exe following the steps below to search for and change the IP address of the
camera.
1. Start the machine.
Execute the IP Finder.exe from the supplied CD.
2. Find the camera (Search)
Search for the product from your LAN. The factory IP setting 192.168.0.20 appears on
the screen.
1. Click Search to
find the IPCAM on
the LAN.
3. Changing the IP address and related settings for the network environment
When you find the camera, click it and the settings will appear on the right side. Change
the settings for the new network environment you need.
2. Enter the settings for the
new network environment
you need.
12