Application setting > motion detection – Asante Technologies Voyager II User Manual
Page 79
Name: UDP server name
Network Address: UDP IP address of UDP.
Port: UDP port
Remove
Modify
Modify: Modifies the setting value
Remove: Removes the setting value
Application Setting > Motion Detection
You can open the setting frame by clicking on the area to monitor. To move area to monitor,
drag the area with your mouse; to adjust the size of the frame, drag the arrow to adjust after
you move the mouse to the edge of the area and left-click; There are 3 frames available for
setting. You may adjust the sensitivity of the area by entering the degree of sensitivity in the
“Detect Level” field. “Lower” is least sensitive, “Highest” is extremely sensitive.
Exclusive: User can set some areas that are not willing to be detected. The function appear as
number 4 (blue frame) in the picture.
Select Save to complete and activate your settings.
79