Asante Technologies Voyager II - Manual (Page 53)

WEP security mode:
Select an encryption mode from the list. The format is “None” by default, indicating that the
security function is disabled.
Authentication mode: One of the following authentication modes is required when you select
a WEP encryption mode from the security list.
Base station with enabled
encryption function
Encryption mode
Encryption authentication type
Encryption group
1. 64 Bit (10 Hex chars)
2. 64 Bit (5 ASCII chars)
3. 128 Bit (26 Hex chars)
4. 128 Bit (26 ASCII chars)
53