Asante Technologies Voyager II - Manual (Page 48)

Basic Setting > Network > Wireless (Wireless network setting page)
Attention: Only wireless model provides this wireless function. (VOYAGER IW)
„ Basic Setting > Network > Wireless Setting> AP information
Scan: Scan the nearby wireless station; you can acquire most of the information of those
stations (such as SSID, Mode, Channel, Encryption, Quality and BSSID).
Scan the nearby wireless station
„ Basic Setting > Network > Wireless Setting> Wireless
Enable: Turn on or off the wireless function.
Mode: Selection of the wireless networking mode.
1. Infrastructure: Infrastructure networking mode.
This camera uses the wireless Access Point (AP) as the hub when set to infrastructure
networking mode and connects to the network via the wireless AP.
2. AdHoc: Point-to-point networking mode.
This camera connects to other wireless devices via a wireless network when it is in the
AdHoc point-to-point networking mode; i.e. the product connects to other devices equipped
with built-in wireless connection function without the need to access from any AP.
48