Asante Technologies Voyager II - Manual (Page 63)

Step 2: Click Exceptions
Step 1: Click Windows Firewall in the Control Panel
Step 3: Check UPnP Configuration.
3. View the connection device using “My Network Place”
Step 2: The LAN camera appears.
Double-click to access the main page.
1. Open “My Network Place”
Basic Setting > Network > SMTP Server (mail server setting)
This camera is able to transmit images to a particular email address when a motion detection
event occurs or a sensor is triggered. To use this function, a mail server setting for the camera
is required.
Enter the following information in sequential order to complete the setting:
z SMTP server: the SMTP server IP address.
z SMTP From: the email of the sender, i.e. [email protected]
z SMTP Authentication: enables/disables
63