Panasonic MotionDV STUDIO 5.6E LE eng User Manual

Page 11

Advertising

- 11 -

Before use

Please read the following first

∫ About usable file formats

This software allows the following file formats to be
input and edited, or output:

• Some files in the above file format may not be used.

∫ About DV connection and USB connection

You can use an USB 2.0 cable (for USB connection) or

a DV cable (optional) (for DV connection). (Each one of

the terminals should be equipped with the DV device.)

Functions are limited as follows depending on the

method for connection.

• USB connection is compatible with USB 2.0 (High

Speed) cable only.

• In USB connection, the mode etc. on the video device

differ depending on the functions you want to use. For

details on how to connect, refer to the operating

instructions of the video device.

• To play ASF files, a device which supports MPEG4

motion image (ASF format) is needed.

This product is licensed under the MPEG-4 Visual
patent portfolio license for the personal and
non-commercial use of a consumer for (i) encoding
video in compliance with the MPEG-4 Visual
Standard (“MPEG-4 Video”) and/or (ii) decoding
MPEG-4 Video that was encoded by a consumer
engaged in a personal and non-commercial activity
and/or was obtained from a video provider licensed
by MPEG LA to provide MPEG-4 Video. No license is
granted or shall be implied for any other use.
Additional information including that relating to
promotional, internal and commercial uses and
licensing may be obtained from MPEG LA, LLC. See
http://www.mpegla.com.

Input/Edit

Output

AVI/BMP/JPEG/PNG/
TIFF

(uncompressed)

WAV

(uncompressed)

MPEG1/ASF/AVI

USB
connection

DV
connection

Calibration (

213

)