Panasonic MotionDV STUDIO 5.6E LE eng User Manual
Page 84
Edit mode
- 84 -
Non-linear edit mode
Note
` You can also check the video by selecting the clip and
dragging the slider in the control screen. (You can only
check the clip one by one and cannot check the audio.)
` While the edit track is being played, you can capture a
still image clip from the video played.
During playback, capture a still image clip with the same
procedure as Snapshot. (
` When the special effects are set on the clip, playing
video may be slowed down or the audio may be
interrupted. This occurs because the preview data is
temporarily generated but it does not affect the output.
∫ To adjust the volume of the playback clip
You can adjust the volume by double-clicking a clip in
the edit track and entering a numeric value in the
volume setting column on the [Properties] screen.
• You can set the volume from 0.0 to 4.0 times.
• This is a different control from the volume setting in
Audio Mix (
). For example, if you set the volume
control to 0% in Audio Mix, setting the volume in the
[Properties] screen even to 4.0 times will not play the
audio.