Panasonic MotionDV STUDIO 5.6E LE eng - Manual (Page 25)

Assistant edit
- 25 -
Assistant edit
Outline of operation
When editing using the Edit Assistant, follow the
procedure below:
Action Required
` To capture video from the video device (DV device),
connect the video device in the Tape Playback Mode
and set the tape position to the point where you want to
start the inputting beforehand. (Refer to the “operating
instructions for PC connection” for the connection to the
PC.)
1 Select the video input source (capture source).
2 Select the output destination of the captured video.
3 Select whether you need effects or not and the type
of the effect to be applied to the video.
• You can also set for the title, effect and background
music. ( @ 30 )
4 Click [Finish] to start the automatic edit.
Input of video, edition of a video and the preparation for
output will be performed automatically as set and the
Output mode screen will be displayed in accordance
with the output destination.
Now, the assistant edit is completed.
Make various settings and output the video. (
@ 174 )
2
1
3
4
Input source Output destination
Video device (DV device)
Hard disk Video device (DV device)
Hard disk
E-mail