Panasonic MotionDV STUDIO 5.6E LE eng - Manual (Page 42)

- 42 -
Input mode
DV device input mode
Capturing video clips by specifying the range
Set the capture start point (Mark-in) and the capture end
point (Mark-out) to capture a video clip (video).
You can easily reset the points and capture a video clip
more accurately.
1. Click .
The preview screen presents the video being played.
2. Click at the position where you start
capturing.
The video display is paused.
3. Click .
The capture start point is set, and a yellow triangle
mark appears.
• If you quit setting halfway, select [Input tape] >>
[Cancel Mark-in/Mark-out] in the menu.
4. Click .
5. Click at the position where you want to end
capturing.
6. Click .
The capture end point is set, and an icon and a yellow
triangle mark appear.
• In order to cancel the setting, right-click the area set
by the yellow marks and select [Delete index].