Panasonic MotionDV STUDIO 5.6E LE eng - Manual (Page 195)

Output mode
- 195 -
File output mode
2. In , specify the output destination and file
name.
• The output destination can be selected from the
folders ([MaterialFolder] is set by default) registered
in the library.
3. Determine the settings on , and if
necessary.
• For each item, refer to the descriptions on the input/
output setting screen. ( @ 188 )
4. Click , and confirm the estimated size of a
file to be output, and others.
The detailed information screen for output file will be
displayed.
After confirmation, click [Close] to close the screen.
5. Click .
Output will begin.
When the output is completed, the message for the
end of the file output appears in
.
The output file will be displayed in the library as a video
clip.
• When you transfer the data to the SD Memory Card,
the message for completion of the transfer is
displayed. Click [OK].
• To cancel the output halfway, click [Cancel].
However, if you overwrite an existing file, that file is
deleted even though you cancel the output halfway.
When you overwrite an existing file, check the file
carefully before the operation.
• When you wish to change the data to be output prior
to the output, return to the Edit mode and change the
data on the edit track.
Or, re-select the file on the library and then drag and
drop it on the control screen.
• During output, a display such as [Outputting MPEG1
file] appears.