Panasonic MotionDV STUDIO 5.6E LE eng - Manual (Page 57)

- 57 -
Input mode
DV device input mode
5. Click [Quit] when you stop capturing.
The capturing ends and the video captured is
displayed in the library.
Note
` If you want to capture the image as a still image, click
[Snapshot].
The settings for the still image clip to be captured can be
done on the still image setting screen in the Settings
mode. (
@ 55 )
` The display size of the video being captured can be set
on the [Video] setting screen in the Settings mode.
(
@ 207 )
` Double-click the still image clip in the library, and the
software associated with its format will be activated and
the image will be displayed.
` You cannot capture anything other than still images
(video etc.) from the card in this mode.