Panasonic MotionDV STUDIO 5.6E LE eng - Manual (Page 248)

Q&A
- 248 -
Printing cannot be performed normally
Printing cannot be performed
normally
Printing cannot be performed.
• Make sure the printer is connected normally with the
personal computer.
Also, check if printing paper is supplied and the
paper settings are correct.
For more information on the printer, read the
Operating Instructions for the printer.
You wish to print a still image.
• The printing feature of MotionDV STUDIO supports
tape label printing and time sheet printing only.
If you wish to print part of a captured still image clip
or video clip, double-click the still image clip in the
library and start [Paint] as a standard accessory of
Windows to print by that software.
However, if an image (BMP/JPEG/TIFF
<uncompressed>/PNG) is associated with other
software, that software will start.
You wish to achieve higher quality prints.
• When you print a part of a video, a blurred image
may be printed.
Use the Photoshot function of the video device when
you take a still image, and use the Snapshot function
when you import that still image into the personal
computer. These procedures provide more beautiful
prints.
The size of a printed label is too large or too
small.
• Although the tape label is printed in the size that fits
the size of VHS tape or DV tape, the size may vary
depending on the printer you are using.
This section covers the solutions to troubles that often
occur when you print a tape label or time sheet in
MotionDV STUDIO.