About the face matching function – Panasonic WJ-NV200 - User Manual

Page 12

Advertising
background image

12

This recorder (WJ-NV200K or WJ-NV200K/G) has the face matching function that compares the registered face images with a
face displayed on live images to detect a person with a closer match. When the person is detected, it is possible to activate an
alarm notification.
To use the face matching function, there are following restrictions.
• Only Camera 1 is available.
• A camera supporting the face detection function is required.
Refer to the "readme.txt" on the provided CD-ROM about the available cameras.
The maximum number of faces that can be detected simultaneously depends on the detection performance of the camera.
• When the face matching function is activated, the settings on the "Advanced recording setup" page (☞ page 52) for Camera

1 will automatically be changed as follows.

Compression:

H.264

Image capture size: SXVGA (1280 x 960)
Frame rate:

5 ips

Image quality:

SF

HDD saving mode: Except
• The face matching function is unavailable while recorded images are being played back.
• While the face matching function is being activated, the maximum number of multi-screen segments is 4.
• The performance of the face matching function depends on the detection performance of the camera and recorder. When

many people appear on images at the same time, the following problems may happen: It may take time for face matching or
several face images may not be matched.

• Face images can be registered only on recorded images played back on the recorder. It is impossible to register face images

displayed on images from the camera while recording is not being performed. It is recommended to perform settings to
record images for 24 hours.

Notation about the installation and setup of the camera

When performing the installation and setup of the camera, note the following so that the performance of the face matching func-
tion is maintained.

• Install the camera so that the width ("a" in the illustration) of a face image becomes 125 pixels or more.
Example) When the image capture size is "1280 x 960", the width of the face image should be 1/10 or more of the whole

screen.

About the face matching function

960

a

1280

Advertising