Panasonic WJ-NV200 - - Manual (Page 72)

72
About the network log
The network error logs (occurrence date & time and error
details) will be displayed in list form.
Up to 100 logs are saved. When more than 100 logs are
filed, the older logs will be overwritten by the newer logs. In
this case, the oldest log is the first to be overwritten. Refer to
page 86 for further information about the error logs.
Note:
• Information will not be updated while logs are being dis-
played.
■ Functions for maintenance
License is added to operate the recorder. In addition, set-
tings and operations are also performed for maintenance of
the recorder.
Note:
• When using an unformatted SD memory card, format it
using this recorder. Refer to the Operating Instructions
(PDF) for how to format a SD memory card.
[Registration of license]
To use the recorder, it is necessary to obtain the
"Registration Key" from the key management system and to
register the license. Enter the license for the recorder.
Clicking the [Setup >] button will open the registration win-
dow to register the license. (☞ Page 73)
[Reset all settings]
Initializes the setting data. Click the [Execute] button to dis-
play the confirmation window to start initializing.
Note:
• The following setting items will not be reset to the default
or loaded.
• HTTP port number
• FTP port number
• Network port
• DNS Setup
• License number
[Save data (to SD card)]
Saves the setting data on the SD memory card. Click the
[Execute] button to display the confirmation window to start
saving.
[Load data (from SD card)]
Loads the setting data saved in an SD memory card on the
recorder. Click the [Execute] button to display confirmation
window to start loading.
[Save face data (to SD card)]
Saves the face matching data on the SD memory card. Click
the [Execute] button to display the confirmation window to
start saving.
[Load face data (from SD card)]
Loads the face matching data saved in an SD memory card
on the recorder. Click the [Execute] button to display the
confirmation window to start saving.
[Firmware update]
Updates the software saved on an SD memory card to the
recorder to upgrade the firmware.
Click the [Execute] button to display the confirmation win-
dow to start initializing.
Only an administrator can execute the firmware update.
[Other]
The "Save maintenance data (to SD card)" page opens to
save the maintenance data. (☞ Page 74)