Panasonic WJ-NV200 - - Manual (Page 33)

33
→ The setup menu will be displayed.
Step 4
Click [Advanced setup] → [Maintenance] → the [System
management] tab on the setup menu.
→ The "System management" page will be displayed.
When using this recorder for the first time, it is necessary to register the license for the recorder.
Important:
• After registering the "Registration Key" for the recorder (when using the recorder for the first time), be sure to click the
[Restart] button to restart the recorder. The license will not be effective before the recorder is restarted.
Register the license
Step 1
Enter the "Registration Key" for the recorder by following the
instructions on the provided "Activation Key Card".
Refer to the "Activation Key Card" for further information.
Step 2
Start the recorder. (☞ Page 31)
→ When the system check is complete, the operational
screen will be displayed on the main monitor. If the
license for the recorder has not been registered yet, the
message asking you to register the license will be dis-
played.
Step 3
Click the [Setup] button.