Panasonic WJ-NV200 - - Manual (Page 69)

69
Edit the administrator information [Administrator setup]
The administrator information relating to the password and default screen, etc. can be registered on this tab.
[Administrator name]
Enter the administrator name using the on-screen keyboard.
(☞ Page 36) Enter 5 to 14 alphanumeric characters for the
administrator name.
Default: ADMIN
[Password]
Enter the administrator password using the on-screen key-
board. (☞ Page 36) Enter 5 to 8 alphanumeric characters for
the password. The registered password will be displayed as
"*****" regardless of what is entered.
Default: 12345
Important:
• For enhanced security, make sure to change the admin-
istrator name and password from the default. Change
the password on a regular basis.
[Password (Retype)]
Enter the password that has been set for "Password" again
for confirmation.
[Level]
Display the operation level of an administrator. It is impossi-
ble to change the setting value for an administrator.
"Administrator" has been set for the administrator.
[Default screen]
Select a startup screen to be displayed after login from the
following. (☞ Page 68)
[Edit] button
Register the edited administrator information.