Panasonic WJ-NV200 - - Manual (Page 24)

24
Connection of monitors
Connect the main monitor that displays recorded images or the setup menu to the monitor output connector (HDMI) using an
HDMI cable (option).
Connect the live monitor to the spot output connector (BNC) using a BNC cable (locally procured).
Note:
• Use "High Speed HDMI ® Cable".
• To maintain the stable performance without deteriorating the image quality, use an HDMI cable whose length is 10 m {32.81'}
or less.
• When an HDMI cable is used, it is possible to output audio from the connected monitor.
Live monitor
Powered
speaker
Audio cable (commercially available)
HDMI cable
(option)
BNC cable (locally procured)
Recorder
Main monitor
* When outputting audio
Connect a powered speaker.