Panasonic WJ-NV200 - - Manual (Page 18)

18
Major operating controls and their functions
Front view
q Status indicators
ERROR: Blinks when an error that can become a prob-
lem for the recorder to run the system occurs.
Blinks red: System error
Blinks orange: Thermal error, cooling fan malfunc-
tion, etc.
OPERATE: Lights when the power is on.
HDD [HDD1]/[HDD2]: Indicates the operational status
(access/failure) of the respective hard disk drive.
Blinks green: Indicates that the respective hard disk
drive is being accessed.
Lights red: Indicates that a fault (or an error) has
occurred on a hard disk drive.
Off: Indicates that the respective hard disk drive is
not being accessed.
REC: Lights orange when recording is being performed.
ALARM: Blinks when an alarm occurs, and lights when
the alarm output stops. This indicator will go off
when the [Reset] button (☞ Operating Instructions
(PDF)) is clicked.
w Buzzer stop button [BUZZER STOP]
Press this button to stop the buzzer that started sound-
ing at an alarm/error occurrence. Refer to the operating
instructions (PDF) for further information about alarms
and errors.
e Mouse connection port [MOUSE]
The provided mouse is connected to this port.
r Restart button [RESTART]
Press this button to reboot the recorder. When pressing
this button, use a sharp object such as a clip.
t SDHC/SD memory card slot
Recorded images can be saved on an optional SD
memory card. (☞ Page 19)
* It is impossible to connect a mouse to the mouse connection port if the
connector from the mouse is upside down. When it is hard to connect,
check the upside down position of the connector from the mouse.
t SDHC/SD memory card slot
r Restart button
e Mouse connection port
w Buzzer stop button
q Status indicators