Panasonic WJ-NV200 - - Manual (Page 54)

54
Set up camera site alarm [Advanced camera site alarm setup]
Set up the action to be taken when a Panasonic alarm protocol received from a camera triggers camera site alarm.
Refer to "Advanced terminal alarm setup" to set "Mode", "Recording camera", "Preset" and "Terminal output" in "Setup by cam-
era" (☞ page 53).
[Back] button
Click the button after completing the settings. The screen
returns to the [Event setup] tab.
Set up command alarm [Advanced command alarm setup]
Set up the action to be taken when a command alarm signal received from a PC that is connected via a network protocol trig-
gers command alarm.
Refer to "Advanced terminal alarm setup" to set "Mode", "Recording camera", "Preset" and "Terminal output" in "Setup by cam-
era" (☞ page 53).
[Back] button
Click the button after completing the settings. The screen
returns to the [Event setup] tab.