Merrychef 402s - Manual (Page 10)

0
Switch the oven ON and immediately press the
Edit Preheat Temp function key to display OVEN
TEMPERATURE.
( note: this screen is available for 5 seconds )

3
Switch oven OFF 
USING THE OVEN FOR THE FIRST TIME 1
The current oven PReHeAT temperature is displayed and this can be increased or
decreased by pressing the function pads on each side of the display. Press and hold
for rapid change. Press the Save function pad to save the set temperature and exit.
The oven has a constant operating temperature for cooking shown as the PReHeAT
TEMPERATURE in the display when the oven is switched on.
When the cold oven is switched on it heats up to the PReHeAT temperature before
cooking with programs can commence. This temperature is set initially at 275°C.
To change the PReHeAT temperature within the range 150°C to 275°C
The Display shows the Start up sequence and oven specification for 2-3 seconds
followed by the edit PreHeat Temp screen.
Oven on time: 00001 Hours
Magnetron on Time: 00000
Door Operations: 00000
Software Version: 1.9LD
MenuKey Code: 000
MenuKey Checksum: 4741
SETTING THE PREHEAT OVEN TEMPERATURE
note: The displayed logo may be different
if programs have been entered from a MenuKey
OVEN INFORMATION
edit Preheat Temp
merrychef
+ >>
Save >>
<< - 275°C
OVEN TEMPERATURE
+ >>