Merrychef 402s - Manual (Page 11)


USING THE OVEN FOR THE FIRST TIME 2
The oven profile sets the following factors: operating temperature scale ( Centigrade or Fahrenheit ),
Oven Mode, Program Protection, Bleep Sound & lower Temperature Band.
SETTING THE OVEN PROFILE
Switch the oven ON and immediately press the Lower
Right ( edit Oven profile is hidden in the display )
function key to display OVEN PROFILE.
( note: this screen is available for 5 seconds )

Switch oven OFF 

PROGRAM MODE
OFF Programs are protected and cannot be edited.
ON Allows Programs to be edited and added,
MenuKey can be created

TEMP SCALE
The display shows the current Oven Temperature
Scale, Centigrade °C or Fahrenheit °F .
3
SOUNDER VOLUME
The volume of the audible warning ‘bleep’ volume
can be adjusted from 1 to 5 (maximum).
5 LOWER BAND Temperature
The range of temperature lower than the
PReHeAT temperature inside which the oven
programs will still operate 15-75°C (30- 150°F)
Please note:
The Oven MODE default settings
are PROGRAM MODe OFF and
MANUAL MODE OFF.
PROGRAM MODe ON allows oven
settings to be altered and should only
be used to establish or edit programs
or to save programs to a MenuKey.
MANUAL MODE
OFF Manual controls are disabled. Only pre-set
Programs can be used
ON Manual controls operate the oven directly
from the control panel
Press Save to save the settings and exit
4
note: The displayed logo may be different
if programs have been entered from a MenuKey
edit Preheat Temp
merrychef
Edit Oven Profile
The display shows the current OVEN PROFILE setting, press the corresponding pad to cycle through
the options available then press Save to store the displayed settings and exit this screen.
Lower Band 50 °C
Save >>
Tempscale: C °
Program Mode: OFF
Manual Mode: OFF
Sounder Vol: 
OVEN PROFILE