Beijer Electronics SCOM RBC EN User Manual
Scom protocol on rbc
Advertising
Table of contents
Document Outline
- SCOM Protocol on RBC Manual
- Foreword
- 1 Interface Configuration
- 2 Message Format and Description
- 3 Device Addressing
- 4 Protocol Description and Timings
- 5 Command Reference
- 5.1 BRT
- 5.2 MAN
- 5.3 VER
- 5.4 POT
- 5.5 TYP
- 5.6 LAU
- 5.6.1 LAU_CONFIG_GETFWVERSION (0x0101)
- 5.6.2 LAU_CONFIG_GETMANUFACTURER (0x010C)
- 5.6.3 LAU_CONFIG_GETDEVICENAME (0x010D)
- 5.6.4 LAU_CONFIG_GETDILMODE (0x010E)
- 5.6.5 LAU_CONFIG_GETDISPLAYADR (0x010F)
- 5.6.6 LAU_CONFIG_GETCOMSERMODE (0x0110)
- 5.6.7 LAU_CONFIG_GETPOTMODE (0x0113)
- 5.6.8 LAU_CONFIG_GETREMOTECONTROL (0x011C)
- 5.6.9 LAU_CONFIG_GETSTARTUPBRIGHTNESSMODE (0x0124)
- 5.6.10 LAU_CONFIG_GETSERIALNUMBER (0x0125)
- 5.6.11 LAU_CONFIG_GETDEFAULTBRIGHTNESS (0x0126)
- 5.6.12 LAU_CONFIG_GETDISPLAYGROUP (0x0127)
- 5.6.13 LAU_CONFIG_GETKEYPRESSMODE (0x012A)
- 5.6.14 LAU_CONFIG_SETDILMODE (0x018E)
- 5.6.15 LAU_CONFIG_SETDISPLAYADR (0x018F)
- 5.6.16 LAU_CONFIG_SETCOMSERMODE (0x0110)
- 5.6.17 LAU_CONFIG_SETREMOTECONTROL (0x019C)
- 5.6.18 LAU_CONFIG_SETSTARTUPBRIGHTNESS MODE (0x01A4)
- 5.6.19 LAU_CONFIG_SETSERIALNUMBER (0x01A5)
- 5.6.20 LAU_CONFIG_SETDEFAULTBRIGHTNESS (0x01A6)
- 5.6.21 LAU_CONFIG_SETDISPLAYGROUP (0x01A7)
- 5.6.22 LAU_CONFIG_SETKEYPRESSMODE (0x01AA)
- 5.6.23 LAU_CONTROL_BUZZER (0x0202)
- 5.6.24 LAU_CONTROL_RESET (0x0207)
- 5.6.25 LAU_STATUS_DISPLAYADR (0x0302)
- 5.6.26 LAU_STATUS_SCOMSERMODE (0x0303)
- 5.6.27 LAU_STATUS_POTMODE (0x0304)
- 5.6.28 LAU_STATUS_BUZZER (0x0306)
- 5.6.29 LAU_STATUS_BACKLIGHT (0x0307)