Bell & Gossett VTP2006 Series VTP – Vertical Turbine Pumps - Manual (Page 33)

33
Repair Parts – SECTION 7
ORDERING PARTS
When ordering spare or replacement parts, the pump
serial number and size and type of pump must be given.
This can be found on the nameplate furnished with the
unit. Give the complete name and reference number
of each part as indicated on the applicable sectional
drawings, Figure 1 or Figure 2, and the quantity
required.
STOCKING SPARE PARTS
Spare parts to be kept in inventory will vary according
to service, field maintenance, allowable down time and
number of units. A Minimum inventory of one complete
set of bearings and one spare of each moving part is
suggested.
RETURNING PARTS
A completed Return Material Authorization (RMA) form
must accompany all materials returned to the factory.
The RMA forms can be obtained direct from the factory
or through your local Bell & Gossett Representative. The
RMA form must be filled in completely and forwarded
as directed thereon. Parts being returned under warranty
claim must have a complete written report submitted
with the RMA form.
Returned goods must be free of any
hazardous materials, substances, or
residue.
Returned material must be carefully
packaged to prevent transit damage - the
factory cannot assume any responsibility for parts
damaged in transit.
Repair Parts – SECTION 7
WARNING
CAUTION