Revolabs FLX2 VoIP Advanced - Manual (Page 18)

18
Note: For some of the common IP PBXs, Revolabs provides
documents on required settings for the FLX. The documents can
be found on the support website at
http://www.revolabs.com/Support/Product-Line/FLX.aspx .
Managing A Call
The FLX2 Wireless Conferencing system is equipped with a VoIP interface that allows
the system to make conference calls in a VoIP network. The following are the basic
operational instructions for making and receiving telephone conference calls.
Calling Configurations
The FLX2 Wireless Conferencing system has the ability to make and receive calls in
many different ways. This provides the caller the ability to choose what mode or call
type best suits the needs of each individual call.
Speaker Mode
Speaker mode allows the call to take place using the Speaker and Microphones
provided with the FLX2 System. This allows multiple users, within the conference room,
to participate in the call. It also provides the ability for the Microphones and Speaker to
be located anywhere in the conference room to meet the needs of each meeting. The
call, as well as the Speaker and Microphones, are controlled by the FLX Dialer. The
user can switch between ‘speaker mode’ and ‘handset mode’ while in a call.
Handset Mode
Handset mode allows a telephone call to take place through the handset speaker and
microphone located in the FLX Dialer. This allows a single user to make and receive a
private call. It also provides the ability for the FLX2 System to act as a personal desk
phone. The Microphones and Speaker are not used during a handset call. The user can
switch between ‘speaker mode’ and ‘handset mode’ while actively in a call by using the
key marked ‘‘Handset’ or ‘Speaker’.
NOTE: To switch from a handset call to a speaker call at least
one Microphone should be out of the Charger Base and switched
on, and the Speaker must be switched on. If all Microphones
are in the Charger Base at least one of the Microphones in the
Charger Base has to be activated manually by pressing the
Microphone button before switching from the handset call to a
speaker call.
VoIP Call
The FLX2 Conference Phone allows making conference calls using an Ethernet VoIP
connection. A telephone call can be made using either ‘speaker mode’ or ‘handset
mode’. A telephone call can be made at the same time as a video call. Telephone calls
are controlled via the FLX Dialer.