Revolabs FLX2 VoIP Advanced - Manual (Page 71)

71
Advanced Audio Settings
Use the Advanced Audio Settings page to specify microphone mute behavior, AUX
audio in and out settings, and Acoustic Echo Cancellation (AEC) settings. The
illustration below shows this page. The settings and options on this page reflect the
same settings as can be done on the handset, allowing remotely setting and managing
the phone behavior.
Any changes on this page take effect as soon as the settings are saved; it is not
necessary to restart the phone, but it is necessary to press “Save” for the change to be
taken into the phone.
Advanced Audio Settings
All Mic Mute
If “All Mic Mute” is On, all active microphones are affected when a
mute button is pressed. If one or more active microphones are
outside the Charger Base, pressing the mute button will change
the mute status on all microphones outside of the Charger Base.
Microphones in the Charger Base will not be affected and will stay
muted at all times. If all microphones are in the Charger Base,
pressing the mute button will change the mute status of all
microphones in the Charger Base. The default for “All Mic Mute’”
is Off.
Start Mute The “Start Unmute” option specifies that microphones will be
unmuted when taken out of the Charger. The default value is On.
Aux In,
Aux Out The “Aux In” and “Aux Out” settings are used to enable and
disable Aux audio connections on the FLX Base.
Aux In Level,
Aux Out Level The “Aux In” and “Aux Out” settings are used to change the level
of the Aux In and Out signals. The range is 1-15.