Revolabs FLX2 VoIP Advanced - Manual (Page 57)

57
Below is an illustration showing the Date/Time page settings followed by a table
describing each field.
Date/Time
Network Time
To enable the system to automatically detect the local date and
time by using a public Date Time Server (DTS), set the Network
Time to On. If you want to manually specify the local date and
time, choose Off. See page 43 for instruction on how to manually
set the date and time using the FLX Handset.
Time Zone Select the local time zone, indicated as an offset from Greenwich
Mean Time (GMT). These are the available time zones:
-11 Samoa, -10 Hawaii, -9 Alaska, -8 Pacific Time, -7 Mountain
Time, -6 Central Time, -5 Eastern Time, -4:30 Caracas, -4 Atlantic
Time, -3:30 Newfoundland, -3 Brazil/Argentina, -2 Mid Atlantic, -1
Azores, 0 GMT, +1 Berlin/Paris, +2 Athens, +3 Kuwait, +3:30
Tehran, +4 Moscow, +4:30 Kabul, +5 Islamabad, +5:30 Mumbai,
+5:45 Kathmandu, +6 Yekaterinburg, +6:30 Yangon, +7 Bangkok,
+8 Beijing/Hong Kong, +9 Tokyo, +9:30 Adelaide, +10 Sydney,
+11 Vladivostok, +12 Auckland, +13 Nuku'alofa
Daylight Saving
Time (DST) Use the Daylight Saving Time (DTS) option to specify whether or
not you want the system to automatically adjust the time according
to your locale’s DTS rules.
DST Start Rule
and
DST End Rule Use the DST Start Rule and DST End Rule options to indicate the
month, week, day and hour that the time changes. The illustration
above shows the default DST rules for the United States.
Month Select the month in which DST changes.
Week For the specified month, select the week in which DST changes.
For example, if DST changes on the second Sunday of the
selected month, choose “Second.”
Day Select the day on which DST changes, for example, Sunday.