Revolabs FLX2 VoIP Advanced - Manual (Page 23)

23
Ending a Telephone call
1. A call can be ended in two fashions.
a. Press the Red ‘End Call’ button on the FLX
Dialer during a call.
b. Place the Dialer in the charger.
(‘Handset mode’ only)
2. When a call is ended the home screen is shown
again.
3. Microphones not in the Charger Base will maintain
their mute states (muted / unmuted) when a call is
ended, and will start in this state when another call
is made.
Calling a Directory Contact
1. A directory contact can be called in one of two
ways.
a. Browse to contact menu: Menu Contacts.
Select the contact, and press the green ‘Call’
key.
b. Browse to contact menu: Menu
Contacts. Select the contact, and press
the ‘Enter’ key or the ‘View’ key. From
the contact view screen, press the
green ‘Call’ key.
Active Call Management
The FLX2 System has many call features that can be used
when receiving or making phone calls. These features can
be controlled via the FLX Dialer during the call.
Caller ID
1. If the incoming caller is in the Contact List, Caller ID
will display both name and number of the incoming
contact.
2. If the incoming caller is not in the Contact List,
Caller ID will display the incoming information from
the network, which might include the telephone
number and Caller ID.