Revolabs FLX2 VoIP Advanced - Manual (Page 54)

54
Home Page
The Home page shows general information about the system as shown below.
The Product field is a brief description of the FLX phone to which you are connected.
The System IP Address shows the IP address of the device, whether it was configured
by DHCP or with a static IP address. The Physical Address is the MAC address of the
phone. The remaining fields show the software versions of the FLX base, speaker and
microphones, respectively. If the microphones have not been removed from the charger
tray, the microphone versions may be shown as “unknown.” To update these fields,
remove the microphones from the charger tray, wait a few seconds for the phone to
detect the microphone state, and then refresh the web page by selecting your browser’s
refresh option. If the microphones or the speaker still do not show a version number,
verify that these components are paired properly. See the pairing instructions in this
manual. If no second speaker is used with the system that entry will always show
“unknown”.
User Settings
In the upper right corner click the User link to access the User settings. The User Menu
will appear on the left side of the page showing these options:
• Audio
• Call Forwarding
• Date/Tim
• Restart
• Logout
Choose a User Menu option to show the corresponding page.